CSC RZ3S, Owner'S Manual

Page: 32 / 58

31
•
As the motorcycle accelerates, pull in the clutch, pull up on the gearshift lever,
and engage second gear. Repeat the above process to engage third, fourth, and
fifth gear.
• When you need to stop, allow the throttle to close and apply both the front and
rear brakes. Warning! Do not apply the brakes too aggressively, as this can
induce a skid. Be cognizant of the road surface and adjust braking force
appropriately.
•
As the motorcycle slows, pull in the clutch, depress the gear shift lever to shift
to a lower gear, and release the clutch. Match your speed as you decelerate to
the gear you are downshifting to. Warning! If you downshift too aggressively
(i.e., you downshift to too low a gear for your speed), you can induce a skid.
•
Repeat the above process, using engine braking and the front and rear brakes to
slow the motorcycle. Prior to coming to a complete stop, pull in the clutch.
Shift the motorcycle to neutral.
• If you wish to park the motorcycle, turn off the ignition key. Caution! Do not
use the kill switch for routine stops and leave the ignition key in the ON position
when the engine is not running. This will run down the battery.
• If you wish to park the motorcycle, turn off the ignition key.
Caution!
Do not
use the kill switch for routine stops and leave the ignition key in the ON position
https://www.motomanuals.net/