CSC HDS 4000, User Manual

Page: 5 / 6

3
copies of the partition tables and drive structures are produced. If different sized drives are
duplicated, the resulting drive may be unusable. Disabling
Partial Copy ensures that only
identical drives are cloned.
Verify
Enabling Verify will automatically scan target drives for data recording errors using the IDE
Verify command during the copy process. This approximately doubles the time required to
copy drives. Enable the
Verify option if the quality of the target drives is in question, or if data
integrity is of absolute importance. Disable the Verify option for top performance.
Verify Only
The Verify Only option disables the copying process. If Verify Only is enabled, all target
drives will be scanned for errors. No data will be transferred to the targets. Errors will be
reported on the LCD as they are detected. Enable
Verify Only to test the target drives.
Disable Verify Only for normal duplication.
Auto Start
The Auto Start option is used to automatically start the duplication process when the power is
turned on. Enable Auto Start for ease of use in a production environment. Disable Auto
Start for manual operation.
LBA Display
The LBA Display option sets the progress display in hexadecimal LBA mode. This displays
the block number of the 512 byte sector currently being copied in hex. Enable LBA Display to
see the current block number in hex. Disable LBA Display to display the progress as percent
complete.
Defaults
The Defaults option re-sets all options to the factory default states below:
Partial Copy
Disabled
Verify Disabled
Verify Only Disabled
Auto Start Disabled
LBA Display Disabled