CS IRGASON, Instruction Manual

Page: 33 / 74

IRGASON
®
Integrated CO
2
/H
2
O Open-Path Gas Analyzer and 3D Sonic Anemometer
21
FIGURE 7-2. Setup window in ECMon
7.15 Device Configuration Utility
DevConfig software ( Dev ice Config uration Utility ) may also be used to change
settings, although ECMon is generally preferred because of its more user-
friendly interface.
DevConfig
may be downloaded from the
IRGASON, EC150
& EC155 Support CD (pn 27007), or may be downloaded free of charge from
the Campbell Scientific website www.campbellsci.com ). DevConfig requires a
USB driver to communicate with the EC100, similar to ECMon . See Section
7.14 ,
ECMon
(p. 19)
, for notes on installing a USB driver.
After launching DevConfig , select “EC100” from the list of device types. The
EC100 electronics should be connected to the PC with the EC100 USB cable
(pn 26563) and the appropriate USB port selected before connecting. Once
connected, the settings tab displays all the current settings. The Apply button
must be clicked to save any changes.
DevConfig is also used to send an updated operating system to the EC100
electronics. The Send OS tab gives directions on this procedure.