3. LI MODE
：
AC Power is connected with the wall
socket properly, Press "MODE" key, The
LCD signal will show "LI", the charger is
switched to LiFePO4 battery mode
(LiFePO4), correctly connect the charger
output leads (Red"+", Black"-") to battery
positive and negative
4. DC ADAPTER MODE:
A.C Power is connected with the wall
socket properly, Press "MODE" key and
hold for 3-5 seconds, The LCD signal will
show "DC", the charger is switched to DC
Adapter with 12V 6Amp (MAX output 72
Watt)
5. LOW TEMPERATURE CHARGING
MODE
：
When the ambient temperature is below -
10 degrees, Press "MODE" Key, The LCD
signal will show
this mode can be set
" "
for battery charging to facilitate the rapid
recovery of the battery capacity.
NOTED: ONLY FOR 12V LEAD ACID
BATTERIES (Standard, AGM)
6. BATTERY TESTER MODE
：
The charger can be used for testing your
battery healthy. Correctly connect your
battery positive and negative with the
charger leads, no need to connect AC
power.
The LCD display will indicate battery
indicator 20-100%, "BAT LOW" will be
indicated while the battery voltage is LOW,
easily to know your battery status.
