CS Instruments 0699.0401, Instruction Manual, Page: 7 / 16

7 V4-02-2011
DISPLAYFUNCTION
SPEZIAL INDICATIONS
FA 400 is configured to be connected to DS 300. In this mode, alarm function in FA 400
is disabled and will be handled by DS 300
Indicates that an alarm is reached. The relay will be switched and the measurement
value is blinking
Display
FA 400 can display up to 3 measured values. This are temperature, rel. humidity and dew point.
For better reading only one measured value is displayed. The measured values are toggled dur-
ing normal operation mode every 3 seconds.
The following changes an be made:
- Alarm value
- Display of measured value (temperature, rel. humidity and dew point)
- Display contrast
- Display upside down
Settings ex work:
- Dew point in °Ctd
Menu buttons
On the top of FA 400 are the capacitive key buttons to operate the display menu.