CS Instruments 0699.0401, Instruction Manual, Page: 3 / 16

3 V4-02-2011
Please read carefully before starting the device!
Attention: Do not exceed a pressure range of > 50 bar with standard version. With spe-
cial versions up to 350 bar.
Observe measuring ranges of the sensor! The probes will be damages if they are
overheated. Observe max. storage and transport temperature as well as max. operating
temperature (e. g. protect measuring instrument from direct sunlight).
The manufacturer cannot be held liable for any damage which occurs as a result of non-
observance or non-compliance with these instructions. Should the device be tampered
with in any matter other than a procedure which is described and specified in the manu-
al, the warranty is cancelled and the manufacturer is exempt from liability.
The device is destined exclusively for the described application.
CS Instruments GmbH offers no guarantee for the suitability for any other purpose and
is not liable for errors which may have slipped into this operation manual. CS Instru-
ments GmbH is also not liable for consequential damage resulting from the delivery, ca-
pability or use of this device.
We offer you to take back the instruments of the instruments family FA 400 which you
would like to dispose of.
Adjustments and calibrations should only be carried out by qualified employees from the
measurement and control technology branch.
Important: Before installation briefly bleed the compressed air in order to remove con-
densate and particles. This prevents soiling of FA 400. Standing air leads to long mea-
suring times.
SAFETY INSTRUCTIONS
!
BESCHREIBUNG
The FA 400 (from -80 bis 20 °Ctd) is the ideal dew point meter with integrated display and
alarm relay for refrigeration, membrane and adsorption driers.
Special features :
- -80 to 20 °Ctd
- Integrated display
- Alarm adjustable via keyboar (60 V, 0.5 A)
- Pressure-tight up to 350 bar (special version)
- Extremely long-term stable langzeitstabil
- Fast response time
- 4...20 mA analogue output
- 2 versions, for refrigeration and for adsortpion driers
Programming via SFA Software .
- Analogue output 4…20 mA scalable, switching for alarm relay adjustable
- Calibration and ajustment including certificate
- Switching between °Ctd, % RH, g/m³ and so on
- Read out of service data