Instruction Manual
Art–Nr.: C140560
Seite
10
TX240 Professional-Duo-Touch
CS-ELECTRONIC
www.cs-electronic.com
Depends on different battery types, the operating programs are different.
Battery
type
Operation
Program
Description
Balance
Charge
This charging mode is for charging LiPo / LiFe / LiIon / LiHv
battery in normal mode.
Storage
This program is for discharging LiPo / LiFe / LiIon / LiHv battery
which will not be used for a long time.
Discharge
This mode is for discharging LiPo / LiFe / LiIon / LiHv battery.
LiPo
LiIon
LiFe
LiHv
Fast charge
This charging mode is for charging LiPo / LiFe / LiIon / LiHv
battery in normal mode without balancing.
Auto
mode
Charger automatically detects the connected NiMH / NiCd battery
and control the charging current in the affordable range, and limit
the maximum currents does not exceed the settings value.
Attention: Ensure to set the maximum charging current, or it may
overcharge and damage the battery.
Man mode
Charger will charge the battery with setting current.
Discharge
Charger will discharge the battery with setting current, operation
same as lithium battery.
NiMH
NiCd
Cycle
To increase the remaining usable battery life, cycling is strongly
recommended, charger supports 1 – 5 times of charge ->
discharge or discharge -> charge cycle.
Charge
This mode is for charging PB battery
Pb
Discharge
This mode is for discharging PB battery
This warnings and safety notes are particularly important. Please follow the
instructions for maximum safety; otherwise the charger and the battery can be
damaged or at worst it can cause a fire.
1. Never leave the charger unattended when using.
2. Never charge dead, damaged or wet battery packs.
3. Never charge the battery pack which consists of different types of cells (including different
manufactures).
4. Never allow children under 14 years of age to use the charger.
5. Never charge batteries in extremely hot or cold places or place in direct sunlight.
6. Always charge in a well-ventilated area.
7. Never connect the charger to a battery pack when the vehicle is running.