manualshive.com logo in svg

Crystal DB477C, User Manual

Share
Download
Crystal DB477C User Manual Download Page 11

11

Ground

Microphone 

connector

Microphone [QHM-03]

Antenna 

(not included)

External speaker (not included)

Error

Initial Installation

 External Speaker (not included)

 Microphone

If you plan to use an external speaker, choose a speaker with an 

impedance of 8Ω. The external speaker jack accepts a 3.5mm (1/8")

mono (2-conductor) plug.

For voice communications, connect a microphone equipped with an 

8-pin modular plug into the modular socket on the front of the main 

unit. Press firmly on the plug until the locking tab clicks. Attach the 

supplied microphone hanger in an appropriate location using the 

screws included in the screw set.

External speaker adopt double port BTL, please care about the connecting 
way. The speaker can not connect with the ground, otherwise the speaker 

will be fault. The wrong connecting way as the following picture.

Optional Accessory Connections

 Mute Out

Capable of muting the car stereo when you receive incoming traffic on 

the tranceiver. 

This transceiver has a mute out function allowing you to 

hardwire directly to a compatable head unit with existing mute functionality.

 

Summary of Contents for DB477C













































Reviews:

No comments

Brands by name

Popular brands

Load more brands