22
M
M
4. Use
4.9 System parameter query
WARNING : This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
WARNING : Any change to the reserved settings will automatically void the warranty.
The system’s settings can be checked and adjusted via the remote control by following these steps
Step 1 : Keep pressing 3s on
until you enter the settings
verification mode.
Step 2 : Press
and
for see the configured parameters.
Step 3 : Press
to select the setting to be modified, the value is blinking.
Step 4 : Press
and
to adjust the setting value.
Step 5 : Press
to set the new value.
Step 6 : Press
to return to the main screen.
If not operation for 10s, it will be exited automatically.
