Crystal Vision
Control and Status monitoring
4.7 Presets, default, alarms
Presets
Up to 16 user-defined configurations may be stored and recalled remotely by
VisionWeb. Presets store the board setup data including operating mode card
status. The presets are numbered 1-16.
Preset select
Store or recall TANDEM10-VF’s configuration from
one of 16 memory locations.
Store
Store the current configuration in the selected preset memory.
Recall
Recall a configuration from the selected memory. This will
overwrite the current TANDEM10-VF configurations.
Card default
Reset the board to its default settings.
Default exc
presets
Reset the board to default settings but leave preset memories
unaffected.
Default inc
presets
Reset the board to default settings and erase preset memories.
TANDEM10-VF User Manual R1.0
27
26 June 2017
