Crystal Vision
Using the front control panel
TANDEM HD-20 User Manual R1.4
30
24/05/2007
Card edge status
From the STATUS top menu press F1 then SCROLL to access the status menu options.
Menu
Comment
Input/Output
line Standard
The Input video line standard is shown.
625i, 525i, 1080i 50/59.94/60, 1035 59.94/60, 720p 50/59.94/60
Input audio
groups present
Groups containing audio data present on the input video.
1234
groups contain audio. ‘s
‘
no audio present.
Output audio
groups present
Groups containing audio data present on the output video.
1234
groups contain audio. ‘s
‘
no audio present.
De-embedder
channel status
Channel status of the input de-embedder A and de-embedder B.
1234
channels active.
s
channel silent.
Embedder
channel status
Channel status of the output embedder C and embedder C.
1234
channels active.
s
channel silent.
Sub-PCB
channel status
Channel statuses of any fitted sub-PCB.
1234
channels active.
s
channel silent,
Na
not fitted
Timing
reference status
Four-word Composite timing reference signal is present and correct.
Ok, Err
Front sub-PCB
type
Type of sub PCB fitted in the forward position.
HD-Dip, HD-DipR, HD-Aip, HD-Aop, HD-Dop7, HD-Dop1, None
Rear sub-PCB
type
Type of sub PCB fitted in the rear position.
HD-Dip, HD-DipR, HD-Aip, HD-Aop, HD-Dop7, HD-Dop1, None
PCB serial
number
The electronically stored PCB serial number. This should correspond
with the serial number label affixed to the PCB connector.
