Crystal Vision
Using the front control panel
TANDEM HD-20 User Manual R1.4
27
24/05/2007
To continue with control panel operation or configuration, press the CAL key once. A second
press of the CAL key will return to Statesman control.
The control panel will display the name of the card that first responds to the polling request
together with its location number.
The location number consists of the frame number plus the card position in the frame.
Navigating the display
The functions assigned to control panel keys are:
•
DEVICE – enters Device menu to select a card or show cards available / enters panel set
up when held down during power up / shows frame status when pressed from Statesman
mode
•
CAL – enters or leaves Statesman mode / enters panel diagnostics mode when held down
during power up / updates the display
•
Asterisk – enters board rename menu from the Device menu
•
F1 to F4 – soft keys, function assigned within each menu
•
HOME – moves the display to the home menu
•
ENTER – accept current selection
•
Upward arrow – used to move up the menu structure / enter lock panel menu from the
Device menu
•
Rotary control – shaft encoder used to select options or variable data
Note:
Please refer to the Crystal Vision Control Panel manual for details of the Panel Setup, Lock Panel and
Diagnostic menus.
Selecting TANDEM HD-20
To select a particular card in a frame, press the DEVICE key to go to the Device menu.
Note there may be a delay whilst the frame is interrogated during which time the ‘No cards
Found’ could be displayed.
The top line of the display will show ‘Available Cards X’, where X is the number of cards that
have responded so far to the polling request.
The available cards menu
Rotate the shaft encoder and the bottom row will display the successfully polled cards by
name and location or slot number.
