Crystal Vision
Hardware installation
REMIND-E User Manual R1.1
6
15/05/2008
The new IP address is entered with the shaft control one digit at a time. The active digit is
indicated by the * which can be moved left or right using the F1 and F4 soft keys. Once
the new address is compete press the ENTER key to accept the new address.
The display will now indicate that it is required to reboot the REMIND-E. This is
necessary before the new IP address is actioned. Rotate the rotary shaft control to display
the reboot menu and press soft key F2.
REMIND-E Reboot menu
Once the F2 soft key has been pressed you will be asked to confirm this action by
pressing the F3 soft key.
Confirm reboot message
REMIND-E will now briefly indicate that it is rebooting after which the panel will blank
before restarting in the home menu. To confirm that the new IP address is in place enter
the Stats menu by pressing the F4 soft key and scroll the rotary shaft control to show the
IP address status.
Auto IP address configuration (DHCP mode)
From the home menu press the soft key F3 to enter the setup menu. Once in the setup
menu rotate the shaft control to display ‘REMIND-E DHCP’.
DHCP menu
