Crystal Vision
Trouble shooting
REMIND-E User Manual R1.1
13
15/05/2008
4 Trouble shooting
Fault finding guide
REMIND-E
The REMIND-E has two LED indicators
Frequently asked questions
Why is the display black and/or no LEDs illuminated?
Check that the REMIND-E is powered and that the fuse is intact
Check that the panel is cabled correctly
Comms LED not illuminated
Check that the REMIND-E is connected to the LAN
Check cabling is intact
Why do I keep getting a warning message about a power supply/fan/temperature
problem on the frame?
Refer to the frame manual for all frame warnings
Why do some cards do not appear in the available cards list?
Some cards take longer than others to finish their initialisation routines - try waiting at least
30 seconds for all cards to initialise
Check that any cards with remote/local switches are set for remote control
Check that any hex node switches are set to zero
Some less complex cards do not report their presence
LED
Colour
Notes
Power
Green
Unlit
Normal operation
PSU or supply fault
Comms
Unlit
Flash amber
No comms or disconnected
Comms present
