Crystal Vision
Statesman
Smart Switch 3G User Manual R1.10
32
01/09/2016
5 Statesman
The Crystal Vision Statesman PC control software is designed to control a range of Crystal
Vision modules via serial control from a PC. Statesman provides a user friendly means of
configuring and operating Crystal Vision modules with the benefit of “see-at-a-glance” status
monitoring.
The main Statesman application communicates with each module in a frame through an active
control panel. Therefore an active panel must be fitted to allow for Statesman control.
5.1 Statesman operation
The initial screen will show an Explorer style view of the connected frames and modules.
Double-clicking on a module will enable the display of the main application menus.
The Statesman main application window
The menu display is repeated for convenience to allow dual-control display of modules with
duplicate signal paths or to allow two functions to be viewed at the same time.
Smart Switch 3G has four Statesman menu tabs: one that provides status information, the
second that allows configuration of the alarms and assigning the GPI output. The third tab is
where the response to errors and monitoring functions are configured. The final tab is where
the delays are set for Black, Frozen, Silence and switch back.