Crystal Vision Indigo Smart Switch 3G, User Manual, Page: 26 / 41

Crystal Vision Using the front control panel
Smart Switch 3G User Manual R1.10
25
01/09/2016
The Status menu
Pressing button F1 from the Home menu will enter the Status menu. This menu is traversed by
rotating the shaft control. The following table lists in order all of the possible selections, the
actual selection will depend on the input type. For a Standard Definition input the EDH
messages will be displayed but not the CRC messages which are related to High Definition.
Similarly with a High Definition input the CRC messages will be visible and the EDH
messages will be hidden.
No changes can be made from this menu as it is read only.
Note: Not all status information will be updated in real time. If necessary press the * button
to update the display information.
Menu Comment
Input 1 video
standard Rotate the shaft control to view the input 1 video standard.
1080p 50/59.94/60, 1080i 50/59.94/60, 720p 50/59.94/60, 625, 525,
Unknown, Missing.
Input 2 video
standard Rotate the shaft control to view the input 2 video standard.
1080p 50/59.94/60, 1080i 50/59.94/60, 720p 50/59.94/60, 625, 525,
Unknown, Missing.
Input 1 audio
groups present Rotate the shaft control to view the groups containing audio data
present in the video on input 1.
1234 groups contain audio. ‘- ’ no audio present.
Input 2 audio
groups present Rotate the shaft control to view the groups containing audio data
present in the video on input 1.
1234 groups contain audio. ‘- ’ no audio present.
Input 1 EDH
status (SD only) Rotate the shaft control to view the EDH status of input 1.
Present, Missing, N/A.
Input 2 EDH
status (SD only) Rotate the shaft control to view the EDH status of input 2.
Present, Missing, N/A.
Input 1 EDH
full field status
(SD only) Rotate the shaft control to view the EDH full field status of input 1.
Ok, Error, N/A.
Input 2 EDH
full field status
(SD only) Rotate the shaft control to view the EDH full field status of input 2.
Ok, Error, N/A.
Input 1 EDH
active picture
status (SD only) Rotate the shaft control to view the EDH active picture status of input
1.
Ok, Error, N/A.