Crystal Vision
Introduction
Crystal Vision
Statesman
Statesman operation
Once Statesman is configured it should automatically detect any Statesman
compatible modules in the connected frame or frames and display them in
the main application left hand explorer-style window.
Open any frame by clicking on the ‘+’ sign or by double clicking on a
frame. Installed modules should be shown with module icons. Frame and
module icons can be named as desired by right-clicking or using the edit
menu and choosing rename.
To aid user recognition of module and frame status quickly, the following
colour and size coding is used:
•
A module is shown present by full colour and absent by greyed colour
•
A module is shown open by large icon size and closed by small icon
•
A module is the source of an active alarm if red and not alarmed if green
Double-clicking on a module will enable the display of the main application
menus.
Statesman main application window
The two large control panes shown in the upper and lower halves of the window
may display different menus for the same card, or controls for different cards.
Click on the horizontal button-bar between the two panes to close the lower
plane or drag the button to vary the size of the panes.
Note:
For further details of Statesman configuration and operation please refer
to the Statesman manual.
DACA214 User Manual R1.9
6
04 February 2019