Crystal Vision
Using the front panel
DEC104S User Manual R1.0
23
29/10/04
Adjusting input video timing
The horizontal delay adjustment varies the timing of the input video relative to input
syncs and blanking in 10 bit mode whichever source is the active reference.
Mode
Input video timing
10 bit
8 bit
Relative to input video syncs and blanking
No horizontal delay available
Press the F4 button to allow the shaft encoder to adjust the input video timing with respect
to the input video syncs in steps of 37ns. This adjustment is available in 10 bit mode only.
The shaft encoder LED will illuminate and an asterisk will appear on the display next to
'HDEL’. The available range is -128 to +127 steps (r/- 4.5 microseconds) relative
to the factory default position. The value cannot be adjusted outside this range.
Recalling defaults
There is no CAL function for the timing adjustments. See also ‘Restoring factory defaults'
in the Card-edge operation section.
