Crystal Vision
The CoCo Controller panel
CoCo104 User Manual R2.0
14
26/09/05
CoCo104 card slots and frame remote connectors
Slot No.:-
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
Indigo 4U frame
R1
R1
R3
R3
R1
R1
R3
R3
R1
R1
R3
R3
Indigo 2U frame
R1
R1
R3
R3
R1
R1
R3
R3
R1
R1
R3
R3
Indigo 1U frame
R1
R1
R1
R1
R1
R1
-
-
-
-
-
-
Indigo DT desk top box
R1
R1
-
-
-
-
-
-
-
-
-
-
Slot No.:-
S13 S14 S15
S16
S17
S18
S19
S20
S21
S22
S23
S24
Indigo 4U frame
R5
R5
R7
R7
R5
R5
R7
R7
R5
R5
R7
R7
Indigo 2U frame
-
-
-
-
-
-
-
-
-
-
-
-
Indigo 1U frame
-
-
-
-
-
-
-
-
-
-
-
-
Indigo DT desk top box
-
-
-
-
-
-
-
-
-
-
-
-
The appropriate remote connector(s) should be connected to the 422 Bus connector at the
rear of the panel using an adapter as explained in the next section.
Note:
The second serial port on CoCo104 is used for Controller communications allowing front
panel and Statesman control at the same time as Controller access.
Panel GPI I/O is not yet assigned.
Controller to frame remote wiring
The connection from the control panel to the appropriate frame remote connector has a
cable with a D-Type plug at one end and an RJ45 connector at the other.
It is suggested that a short adaptor cable be made with a standard RJ45 patch lead and an
in-line coupler used to make the required overall cable length.
Controller panel to frame adaptor and CAT5 patch lead
