5. Ensure the following when cooler is to be serviced:
5.1 Turn off Hot Tank Switch (Figure 7) (Hot & Cold models only) and disconnect power
supply cord (Figure 8).
5.2 Remove bottle from reservoir. (Figure 9)
5.3 Use a bucket to drain water from the cold water reservoir through faucets (Figure 10).
On Hot & Cold models (Figure 11), turn off hot tank switch as above. Allow 1 hour for
the hot water to cool down inside the hot water tank. Remove the drain plug at the rear of
the cooler to drain into a container (Figure 12 and Figure 13).
REMOVABLE RESERVOIR
E & S Series
On Cook & Cold and Hot & Cold models the reservoir can be removed easily by following the
steps given below.
1. Unplug (Figure 14) and approach the cooler from the front.
2. Remove the water bottle (Figure 15) and drain water from the reservoir and hot tank,
remembering to cool and drain hot tank. Allow 1 hour for hot water to cool down inside the
hot tank before removing the drain plug at the rear of the cooler to drain into a bucket
(Figure 16 and Figure 17).
CAUTION! ALWAYS DRAIN WATER COMPLETELY
BEFORE SHIPPING OR STORING THE COOLER!
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16 Figure 17
