Receiving
Inspect the cooler box immediately and carefully for any evidence of shipping or handling damage before
signing to receive goods. In case of shipping damages, claims should be filed immediately with the carrier.
Please note that the carrier will not accept claims for any damage discovered after signing for
UNINSPECTED GOODS.
Ensure the cooler stands upright for 24 hours before plugging it in.
Install Base Plate
1. Stand cooler upright on flat, smooth floor.
2. Align side plate with base (Figure 1), and slide into base to locked position (Figure 2).
3. Repeat for opposite side (Figure 3), (Figure 4).
Locate Water Dispenser
1. Place the water cooler indoors, on a flat level surface in a cool shaded location near a grounded wall
outlet.
2. Position water dispenser so that the back of the unit is a minimum of 4 inches / 10 cm away from the wall
to ensure proper ventilation (Figure 5).
3. Install a bottle of water on the top of the water cooler (Figure 6).
Note: To prevent water leaks, a NON-SPILL Bottle Cap MUST be installed on the bottle (Figure 7).
4. Ensure that the hot water switch near the top of the rear panel is turned off. (Figure 8).
THANK YOU FOR BUYING A CRYSTAL MOUNTAIN WATER COOLER!
GETTING STARTED
Figure 1 Figure 2 Figure 3 Figure 4
Figure 5 Figure 6 Figure 7 Figure 8
4 inches (10cm)
