background image

1.    LED Indicator Lights 

       

Cold LED

 (

 – On when cooler is connected to power)

Blue

      

Cook / Hot LED

 (

 / 

 – 

 – C&C Model or Hot Tank Switch in OFF position – 

Green

GREEN

Red

RED

 – Hot Tank Switch is ON)

      

CrystalFlo LED

 (Yellow – Flash when CrystalFlo timer reaches set point) – light not activated 

for any other function

2.    Light sensor

 (Activates Power save function when room lights are turned off)

3.    Cold Water Lever

 – Depress lever to dispense water. Release lever to stop.

4.    Hot/Cook Water Lever 
          Hot Water  Lever

  (with  Child  Resistant  Safety  Feature)  –  Pinch  the 

  lever  upwards,  and 

RED

depress faucet lever to dispense water. Release lever to stop.

       Cook Water Lever

 – Depress lever to dispense water. Release lever to stop.

5.    Dispense Area Lighting

       

Nightlight

 (

 – On when cooler is connected to power)

Blue

       Pour Area Light

 (White – on during water dispense)

6.      Drip  Tray

  –  Dishwasher  Safe.  Snaps  in  and  out.  Position  glass  or  cup  over  center  to  avoid 

spills.

7.    Cup Dispenser

 – Integrated spring loaded cup dispenser (9oz flat bottom)

8.    Hot Water Activation Switch

 – Located on the back of product near the top right corner (when 

viewed from rear of product)

9.    Water Outlet

 – Hot (or Ambient) and Cold water is dispensed from this location

FEATURES

LED Indicator Lights

Cold LED

Cook / Hot LED

CrystalFlo LED

CrystalFlo Water Cartridge

1

2

3

4

5

6

8

9

7

Product may not appear exactly as shown

Summary of Contents for K2









Reviews: