EB30-2R OPERATING INSTRUCTIONS
Page 4
SAFETY PRECAUTIONS
Read these operating instructions carefully and thoroughly before attempting to
operate the equipment.
This operating manual should be available at the testing site at all times.
Always follow the procedures and actions defined in this manual, failure to do so
may result in personal injury or other damage. The manufacturer cannot be held
liable for personal injuries or vehicle damage that occur as a result of misuse of the
equipment.
All the national and international safety guidelines and legal regulations are to be
followed when operating testing equipment.
The operator is obliged to adhere to all the regulations applying to the workplace and
to ensure his knowledge of such regulations is up to date.
Do not allow other personnel near the test vehicle or rollers while a test is in
progress. Check that the area is clear before the rollers are started or the vehicle
moved EACH TIME this action is taken.
Testing often takes place with the engine running, to provide a vacuum supply to the
brake servo. Ensure exhaust extraction or adequate ventilation is used to clear the
poisonous exhaust gasses.
Do not modify the equipment or change any internal settings
– this could result in a
very dangerous condition where the rollers could be started WITHOUT a vehicle in
the rollers!
TESTING STANDARD
When performing statutory MOT tests it is vital to follow the brake test
procedure detailed in the latest version of the relevant MOT Inspection Manual
