CRT1081IRD-S2-MX
USER’s MANUAL
3.3
Hardware setup
3.3.1 Default network settings
The following default network settings are usually appear when fist time device power on. Please
check that your Host PC network settings match to those default settings to make the the device
connection.
MAC address
00:01:00:15:xx:xx
IP address
192.168.0.100
Subnet Mask
255.255.255.0
Gateway IP address
0.0.0.0
Login
admin
Password
admin
Note. Please see your device MAC address information attached to the accompanying
documentation.
3.3.2 Network and authorization settings reset
You can reset the device network setting and access rights to the default any time you
need. When the device is operating please carefully press IP RESET button on the front panel and hold for
1-2 seconds. The device will automatically start reboot for new settings to take effect. Use the default
network and authorizatuin settings to access the device.
3.3.3 Reset the device configuration to the factory settings
You can reset the device configuration to the factory settings. When the device is operating please
carefully press IP RESET button on the front panel and hold at least 20 seconds antil LEDs start blinking.
The device will automatically start reboot for new settings to take effect. Factory configuration appears
after reboot.
Crypton, January 2013
9
