CRT1081IRD-S2-MX
USER’s MANUAL
4.3
Inputs page
4.3.1 Tuners setting up
CRT1081IRD-S2-MX take signal from 8 DVB-S/S2 receivers (tuners) and 4 DVB-ASI inputs. The
following tuner settings are available.
•
Frequency
– Transponder frequency MHz;
•
Symbol rate
– DVB-S/S2 modulation symbol rate Msym/s;
•
LNB type
– Universal and other LNB convertor types are available;
•
22 kHz Tone
– If
other
LNB type is selected 22 kHz tone signal can be On/Off to switch
high or low (below 11700 MHz) Ku Band frequencies;
•
LNB power
– If on 13/18v power up to 400 mA can be supplied to the LNB;
•
LNB polarization
– If
other
LNB type is selectet and LNB power is set ON 13 or 18 v can
be supplied to the LNB to select proper polarization;
•
LNB frequency
– For
other
LNB type you can enter required LO frequency.
Press
Scan
to apply new tuner settings or
Refresh
to udate Signal level and Signal Quality
information.
Fig. 5 Tuner setting up page
Note. After reset to the factory settings (4.3.2) your current configuration data will be lost.
Export your current settings if you need them later.
Crypton, January 2013
12
