CTL- Contactless Temperature Logger
detailed user guide version 1.2
Page
16
Simple and Smart
C T L U S E R G U I D E
1.8
Connect to the CTL Contactless Temperature Logger
Click on the detected CTL Contactless Temperature Logger (e.g. Cryopak RF-01 18:62: E4:3E: 2F:B7).
The application will open another page where the connected device information is shown
(if the device is not connected yet it will be blank). Click on connect button to connect the CTL
Contactless Temperature Logger with the device (Figure 8.).
The Status LED will blink twice and the buzzer beeps twice. The RF LED will get solid on once the CTL
Contactless Temperature Logger is connected.
All the information’s of that CTL Contactless Temperature
Logger will appear on the screen once it connects (Figure 9.).
Figure 8. Connect the CTL Logger to application.
Click on Connect button to
connect to the CTL
Contactless Temperature
Logger detected
Note
:
If the CTL logger is
programmed with the RF always on
option activated in the device setup
page, therefore there is no need to
manually click on connect. After few
seconds the CTL logger will connect
to application automatically.
