INTERFACING SOLUTIONS
RVCCH-75F
REAR-VIEW CAMERA INTEGRATION
FOR SELECT DODGE,
CHRYSLER & FIAT VEHICLES
www.cruxinterfacing.com
Rev. 042616
3
CONNECTING THE INTERFACE
Follow these steps to properly install the interface module.
Step 1
- Remove the factory radio to gain access to the factory 22-Pin connector.
Located behind the radio, Remove the factory 22-Pin connector.
Step 2
- Using the provided 22-Pin T-Harness, mate both sides of the T-Harness. To the factory harness side, and to the factory radio side.
Also connect the Green LVDS T-Harness to the back of the display (Top Unit) and to the factory connector.