Crux 7 speed blender, Instruction Manual, Page: 12 / 28

10
Operating Instructions
1. Place the motor base on a flat, clean, dry counter top or table.
2. Make sure the unit is unplugged.
JAR ASSEMBLY
1. Using the blade’s collar to handle, place stainless steel blending blade into the base of
the jar (See Figure 4). Holding the jar handle, screw the blade into the jar by turning it
counterclockwise.
2. Always check to be sure the blade collar is properly fitted into the jar before use.
3. To avoid spills, ensure that the lid is firmly secured to the jar. Press the lid down on the
top portion of the jar until it rests firmly in place. Place the measuring cap into the center
of the lid and twist clockwise to secure it safely in place. Use the measure cap to measure
and add ingredients prior to commencing any operation.
4. Add ingredients into the jar.
NOTE: When blending, foods or liquids tend to expand as they rise up the side of the jar.
Do not fill jar past its max line.
WARNING: Pay close attention while processing. Never operate the CRUX 7 Speed
blender when the jar is empty.
IMPORTANT: Make sure the blade collar is properly attached and tightened in the base of
the jar before adding food for processing.
Fig. 3 Fig. 4
MAX
1
2
3
1. 50 oz Tritan Jar
2. Stainless Steel Blades
3. Blade Collar
Never fill jar
beyond the
MAX line