23
not obstruct the view of the driver and is within reach, so
the buttons can be easily accessed.
•
Do not mount behind windshield wipers, metal surfaces,
ornaments, or mirrored sunscreen glass, as these affect
radar/laser signals. Tinted glass does not affect
radar/laser
signal reception.
Conceal the CRUNCH 2160
when you leave your vehicle to
prevent theft and to minimize the unit's exposure to extreme
temperatures, which can temporarily impair performance.
Windshield mounting
1. Install the suction cups and bumper onto the windshield
mounting bracket by sliding them into their holes (if not
pre-installed).
2. Press the bracket base firmly against the windshield
until
the suction cups securely take hold.
3. Slide the unit up to the bracket until the
bracket arms click into the slots on both
sides of the unit.
4. Bend the angle of the windshield mounting
bracket, if
necessary, to adjust for best viewing and detection
angle.
5. When you want to connect power from your vehicle,
plug the small connector of the power cord into the
12-voltDC power input jack located on the side of the
detector.
6. Plug the large adapter of the power cord into the lighter
socket of your vehicle.
