48
+
-
-
-
+
+
Lift Truck Installations
Installation of Your Meter in Lift Trucks, which have the motive pack
bonded to the chassis and also have a 12V accessory battery bonded to the
chassis, may use the diagram below for proper wiring of the appropriate
Prescaler. The 0-100V Prescaler is used where system voltage does not
exceed 100V at any time including during onboard charging. In any other
instance, a 500V Prescaler must be used. If possible, install separate
Anderson(SMH) connector so pack can be charged in truck if batteries
are not changed. This way, battery cycles will be counted.
HV
Battery
Prescaler
Black
Red
(Tagged)
Black
Red
(Tagged)
2 3 4
5 6 7 8
1
Acces.
Battery
2A Fuse. Above 250V
use 500V rated fuse.
Your
Meter
Shunt
12V
or
24V
Warning: Reversing input
voltage destroys Prescaler
and voids warranty.
TO ANDERSON CONNECT
OR
This line not used if DC-DC converter is installed.
Optional
DC-DC
Converter
(-)
(-)
(+)
Summary of Contents for E-Meter
Page 54: ...54 NOTES...
Page 55: ...55 NOTES...
