CRUISING ELECTRONICS E-Meter, Owner'S Manual

Page: 10 / 56

10
Mounting
Our Patent Pending "Ratchet Ring" makes mounting easy and fast .
TIP:
When installing from the front of a
panel or dashboard slide the Ratchet Ring
onto cable with correct orientation
and then connnect
the wires.
12345
12345
12345
12345
12345
12345
12345
12345
12345
Push Ratchet Ring
on untill firmly in con-
tact with panel.
The gasket around the ring
of Your Meter should pro-
vide an adequate seal against
moisture. If a sealant is used
be sure it is silicone so that
the meter may be removed
without damage.
CAUTION!
Orient ring so the ratchet
teeth will engage properly.
Practice installing and re-
moving ring before final
assembly. Considerable
force is required, this en-
sures the ring will not
loosen over time.
Install the meter from the front of your
panel. The panel thickness may be from
1/16" to 1 1/2". Slip the locking ring on
from the rear and press forward until it's
teeth hold the meter securely in place.
PATENTED