CRUISING ELECTRONICS E-Meter, Owner'S Manual

Page: 28 / 56

28
In addition to reporting primary system values, Your Meter is capable of many
other front panel functions and will also display important historical battery
data. The words below the bar graph display indicate which of these functions
you are accessing. To use these functions you must read and understand the
following section of this manual.
RESET DATA LOCK FUNC
Resetting Your Meter
RESET
Resets Amp-hours to Zero and Resets Your Meter to Factory Values.
To
RESET
the Amp-hour display to Zero,
SEL
ect the
RESET
function as
previously described. The letters
AH
will appear in the display. Press and hold
the
SET
button. After 5 seconds the Amp-hour display will be reset to 0 and the
letters
ALL
will appear. If you continue to hold down the
SET
for another 5
seconds all variables and functions are reset to the factory defaults.
RESET DATA LOCK FUNC
Front Panel Locking
LOCK
Prevents user access to Set Up and Advanced Functions.
To
LOCK
Your Meter,
SEL
ect the
LOCK
function as previously described.
The letters
LOC
will appear in the display, indicating you are in the
LOCK
function. Press
SET
and the letters
off
appear indicating the front panel is not
Locked. Press
SET
again and the letters
on
will appear indicating the front panel
is locked. Repeating this procedure toggles the lock off and on, the display will
report
off
or
on
, indicating Lock off or on.
Reset and Lock