Cruisers Yachts DLS CRUISE CRPP-2.6, User Manual

Page: 4 / 12

Disconnect the window control panel, cables for
lightning, speaker cable harness and any other
connections.
The door speakers are fixed with rivets.
3
Usually a wrench, size 10, will be needed. Norm-
ally the bolt is located at the underside of the door.
When the door panel is loose, start with softly
lifting it straight up, to remove the panel.
There are several electric and mechanical
connectors on the backside of the panel.
Release the door lock cable
Use a 4mm drill to remove the rivets. Make sure
all remains from the old rivets are removed from
the inside of the door.
Just drill enough to remove the top of the rivets
Mounting the DLS drivers
Place the new DLS driver in the hole for the
speaker. Use the included rivets and the rivet tool
to safely mount the driver.
(Step 3 might be done several times)
Connect the speaker harness.
Start the assembly of the door panel.
Reconnect all wires harness.
Connect all plugs to the door cover, reconnect the
unlocking device, place the door cover from the
top, by the window seal and push it gently down.
Make sure the clips are in place and can engage.
Give the door panel a push by the hand to attach
to the clips. Mount and fasten all screws to the
correct places.