Cruisers Yachts DLS CRUISE CRPP-2.6, User Manual

Page: 3 / 12

In most cases the screws used are Torx T30.
Unscrew them and store them in a safe position,
to re-use when re-mounting the door panel.
Usually the clips/screws are placed by the red
marks. It may be different in your vehicle.
Be careful when removing the panels and lids,
so there will be no marks.
Dismount the front door by removing the cover of
the door panel.
Hint: Use plastic PRY tools to avoid marks on
the panels and destroy the plastic clips.
Start the dismount
Installation
Pre installation
Disconnect Battery
Included products:
2pcs Woofer
2pcs Tweeter
2pcs Crossover
Included in box:
2pcs Tweeter connection
4pcs Adhesive foam for wrapping
4pcs Terminal crimp connectors
2pcs Four-leaf clover foam for tweeter
10pcs Blind rivet
1pcs Rivet Tool
1pcs Manual
Before you start the process
of replacing speakers,
disconnect and secure the
negative terminal from your
battery/power source. This
will prevent the risk of
damaging yourself or the
products.
Place the disconnected terminal in a secure and
isolated location away from any possible
connection belonging to the battery/power source
system.
Some sound systems may vary in size of the door
speaker. Make sure that your vehicle has the same
size as this kit, before you start the assembly
This is a generic mounting instruction. The
approach is similar to all of the described car
models. Some screws and clips may be placed
differently and depending, if the tweeter is placed
in the A-pillar or side mirror, the course of action
may vary.
General info
2