IMPORTANT
If you are installing the QX118 into a 9.5mm optical drive bay, please note that the
forward screw holes on the QX118 will not line up with the screw holes on a 9.5mm
bay, but the rear screw holes will.
4. Connect the included SATA power adapter cable to the rear of the QX118. Then connect SATA power
from your computer to the adapter cable.
5. If necessary, install a host bus adapter card (HBA) with at least one (1) OCuLink port into your com-
puter. Refer to the HBA's user manual for installation instructions.
6. Connect an OCuLink SFF-8611 cable (sold separately) to your HBA.
7. Connect the other end of the OCuLink cable to the OCuLink port on the rear of the QX118.
QX118 Receiving Frame User Manual
8
