CRU QX118 User Manual Download Page 2

A9-6320-00 Rev. 1.1

©2020 CRU Data Security Group, LLC. ALL RIGHTS RESERVED.

This User Manual contains proprietary content of CRU Data Security Group, LLC (“CDSG”) which is protected by copyright, trade-

mark, and other intellectual property rights.

Use of this User Manual is governed by a license granted exclusively by CDSG (the “License”). Thus, except as otherwise expressly

permitted by that License, no part of this User Manual may be reproduced (by photocopying or otherwise), transmitted, stored (in a

database, retrieval system, or otherwise), or otherwise used through any means without the prior express written permission of

CDSG. Use of the full QX118 product is subject to all of the terms and conditions of this User Manual and the above referenced

License.

CRU

®

 and SHIPS™ (collectively, the “Trademarks”) are trademarks owned by CDSG and are protected under trademark law. This User

Manual does not grant any user of this document any right to use any of the Trademarks. 

Product Warranty

CDSG warrants this product to be free of significant defects in material and workmanship for a period of three (3) years from the

original date of purchase. CDSG’s warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CDSG expressly disclaims all other warranties, including but

not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party

rights with respect to the documentation and hardware. No CDSG dealer, agent, or employee is authorized to make any modification,

extension, or addition to this warranty. In no event will CDSG or its suppliers be liable for any costs of procurement of substitute

products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or

incidental damages arising in any way out of the sale of, use of, or inability to use any CDSG product or service, even if CDSG has

been advised of the possibility of such damages. In no case shall CDSG’s liability exceed the actual money paid for the products at

issue. CDSG reserves the right to make modifications and additions to this product without notice or taking on additional liability.

FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

1. Ensure that the case of your attached drive is grounded.

2. Use a data cable with RFI reducing ferrites on each end.

3. Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

4. Reorient or relocate the receiving antenna.

Summary of Contents for QX118





















Reviews: