CRT Mike, Owner'S Manual

Page: 15 / 24

10
Keypad lock
1. To avoid wrong operation of keys, you can hold
key to lock the keypad.
2. The LCD displays .
3. Repeat the above function to unlock the keypad.
Frequency mode
1. Hold for over 5 seconds, the display will
change to frequency mode.
2. Repeat hold for over 5 seconds, the display
will change to channel mode.
Scan
1. Set SQ or y.
2. Short press key to start scanning the LCD
displays SC .
3. Press any key to stop scan, SC disappear.
Memory channel
In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose.
1. Choose the channel to be stored
2. Hold the memory key (M1, M2, M3, M4) to store it.
3. The corresponding memory channel will show on
LCD, the storage is done.
Using Memory Channel
1. Short press
2. Short press the memory key ( M1, M2 ,M3, M4 )
3. MEM disappears, the memory channel you chose will display in LCD.
1. Short press
key
2. Short Press key to enter Menu.
3. Repeatly short press key until LCD displays
BRI: XX
4. Press or to choose brightness level.
LCD Brightness
3. Repeat the above function to unlock the keypad.
Frequency mode Frequency mode
1. Hold for over 5 sec for over 5 sec
change to frequency mode. change to frequency mode.
2. Repeat hold 2. Repeat hold for over 5 seconds, the display for over 5 seconds, the display
will change to channel mode. will change to channel mode.
y.
key to start scannin canning the LCD g the LCD
3. Press any key to stop scan, SC disappear. 3. Press any key to stop scan, SC disappear.
In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose. In each norm, you can store 4 channels into M1, M2, M3, M4 for fast choose.
2. Hold the memory key (M1, M2, M3, M4) to store it. 2. Hold the memory key (M1, M2, M3, M4) to store it.
w on
3. MEM disappears, the memory channel you chose will display in LCD. 3. MEM disappears, the memory channel you chose will display in LCD.