Professional
FM Transceiver
17
NOTE: Scan function shall be setup in the Scan inforamiton of programming software.
ADVANCED OPERATIONS
Squelch Levels Setup
This function is used for setup the receiving signal intensity. The other party calling can be heard
when the receiving signal intensity reaches a certain level, otherwise transceiver will remain mute.
Squelch off
Under sandby, press the programmed key of Squelch off, the squelch circuit is not mute,
background noise can be heard. Press this key again, transceiver emits "
DU DU
" beep, the squelch
circuit becomes mute. By using this function you can monitor the weaker signal which is hard to
receive.
Press this key again, transceiver emits "
DU DU
" beep and exits the monitor state.
Scan
Scan function can be used for monitoring every channel of current group.
Under standby, press the programmed scan key , transceiver enters into scan state. It scans
channels in scan list one by one. When one channel receives a matching signal, the transceiver will
temporarily stay in this channel till the signal disappears. Press the scan key again, transceiver exits
scan, working channel will be switched to pre-programmed return channel.
Summary of Contents for 8WP
Page 1: ......
Page 2: ...IP67 WATERPROOF INSTRUCTION MANUAL copyright CRT France 2017 ...
Page 3: ......
