Professional
FM Transceiver
16
ADVANCED OPERATIONS
The [
PF1
]
、
[
PF2
]
、
、
、
and
keys are programmable. They can realize the
following functions by programming software.
NOTE: The keys can be programmed of long press and short press , if program of short press, the
function will be activated when press the programmed key , if program of long press, the function will
be activated when press and hold the key for programmed time.
NOTE: Alarm function shall be setup in the Emerge information of programmed software.
Call
Alarm
Under standby, press the programmed key to transmit the
prestored and selected DTMF signaling.
Press the programmed key of Alarm to activate Alarm funciton, the transceiver will sound alarm
beep, meanwhile, it start transmitting and send the alarm beep to companions or systems. Re-power
on to exit alarm.
Monitor
Under standby, press the programmed key of monitor, the transceiver emits "
DU
" beep and enters
into monitor state. CTCSS/DCS decode will be ignored in monitor state, transceiver can monitor
signal of the other party as long as receiving the matched carrier wave.
Summary of Contents for 8WP
Page 1: ......
Page 2: ...IP67 WATERPROOF INSTRUCTION MANUAL copyright CRT France 2017 ...
Page 3: ......
