Installation and Programming Instructions for Electronic Stand-Alone Cylindrical Locks
- 21 -
Delete RF Card
w
è
Mstr
PIN
#
è
9
#
è
Enter the Card
Registered No.
#
è
#
è
✱
Setting Up/Releasing Passage Mode
w
è
Mstr
PIN or
Mgr
PIN
#
è
5
#
è
1
Enable
✱
è
3
Disable
✱
Press the
w
button to activate.
1. Enter the Master PIN Code and press the
#
button.
Green and Red LED blinks.
2. Enter the Program Code
9
and press the
#
button.
Green and Red LED blinks.
3. Enter the delete card number (registered number) and press the
#
button.
Beep melody and Green LED blinks.
4. Press the
#
button.
Beep melody and Number pad blink one time.
F
[Repeat steps 3 and 4 for delete of another card number(if necessary)].
5. Press the
✱
button.
Completes with beep sound.
[For example, you wish to delete two RF Cards for User 11 and User 12 respectively.
Press:
w
è
Mstr
PIN
#
è
9
#
è
1 1
#
è
#
è
1 2
#
è
#
è
✱
]
Press the
w
button to activate.
1. Enter the Master PIN Code or Manager PIN Code and press the
#
button.
Green and Red LED blinks.
2. Enter the Program Code
5
and press the
#
button.
Green and Red LED blinks.
3. Enter the Enable Code
1
or Disable Code
3
and press the
✱
button.
Completes with beep sound.
Another method to disable Passage Mode: Press the
w
button for 3seconds, will disable
Passage Mode.
- 22 -
