Crown SST-3632, Reference Manual

Page: 9 / 34

SST Modules
Page 9
Reference Manual
3 SST-SX
The SST-SX module is a fourth-
order Linkwitz-Riley type crossover
switchable between 80 Hz and 120
3.1 Controls
80/120 Hz Crossover Selector
A two-position switch, located on the
front panel of the module, is used to
select a crossover frequency of 80
or 120 Hz for both channels 1 and 2
of the local (amplifi ed) signals. This
switch also determines the LP Filter
frequency routed to the Mono Sub
Out connector.
Figure 3.1 SST-SX Controls and Connectors
HP Filter Bypass Switch
This two-position switch enables/
disables the high-pass fi lter on the
Channel 1 and 2 local (amplifi ed)
signals.The HP Filter Bypass Switch
does not affect signals routed to the
Mono Sub Out connector.
Hz. It also includes summed low-
frequency output.
Figure 3.2 Typical Input Wiring