INSTALLATION AND OPERATION MANUAL, ELECTRIC MODULAR SKILLETS,
MODELS EMTS-30, EMTS-40
, EMTS-60
INSTALLATION INSTRUCTIONS
(Continued)
LEVELLING AND ANCHORING TILTING BRAISING PAN
1. Place tilting braising pan in the installation position.
2. Place a carpenter’s level on top of the braising pan and turn the adjustable feet to level
braising pan side-to-side and front-to-back.
3. Mark hole locations on the floor through the anchoring holes provided in the rear flanged
adjustable feet.
4. Remove tilting braising pan from installation position and drill holes in locations marked on
the floor. (See installation diagram on page 4.) Insert proper anchoring devices (not
supplied).
5. Place tilting braising pan back in the installation position.
6. Place carpenter’s level on top of braising pan and re-level side-to-side and front-to-back.
7. Bolt and anchor tilting braising pan securely to the floor.
8. Seal bolts and flanged feet with silastic or equivalent compound.
ELECTRICAL CONNECTIONS
WARNING:
Electrical and grounding connections must comply with
the applicable portions of the National Electrical Code and/or other
local codes.
Part No. 10130R3
7
2019-01-16
