INSTALLATION AND OPERATION MANUAL, ELECTRIC MODULAR SKILLETS,
MODELS EMTS-30, EMTS-40
, EMTS-60
ELECTRICAL CONNECTIONS
(Continued)
WARNING:
Before performing any maintenance disconnect the
electrical power supply and place a tag at the disconnect switch to
indicate that you are working on the circuit.
The wiring compartment is located behind the control panel. Refer to Page 4 Service
Connections.
1. Remove the wiring compartment cover and make electrical connections per the wiring
diagram located inside the control housing cover panel. The braising pan must be
grounded in accordance with requirements of the National Electrical Code or applicable
local codes. See warning (page 6). Connection from incoming lines must be waterproof.
2. Ground skillet to terminal provided in control housing. A wiring diagram is provided and is
located inside the control cover panel.
3. Replace wiring compartment cover.
SERVICE CONNECTIONS
All internal wiring for the skillet is complete.
Make service connections as indicated on page 4 and Electrical Connections above.
If faucet is provided connect water supply and check for proper operation.
Part No. 10130R3
8
2019-01-16
