Crown 424839, Original Instructions Manual

Page: 12 / 68

12
English
Declaration of conformity
We declare under our sole responsibility that the
product described under "Technical data" is in
conformity with all relevant provisions of the di-
rectives 2006/42/EC including their amendments
and complies with the following standards:
EN 60950�
Certification Wu Cunzhen
manager
Merit Link International AG
Stabio, Switzerland, 05�06�2019
General safety warnings
ATTENTION! Before using the ap -
pliance for the first time, read this
manual carefully and follow all its
recommendations and rules.
Keep the manual for future reference or for the
next owner.
• Before using, check the appliance housing
integrity; in case of any damages the appliance
must not be used�
Strictly follow all the manufacturer's
recommendations related to the use,
storage and transportation of batteries
and chargers� Failure to follow such
recommendations may cause injury�
• Use the appliance only with intended batteries
(see fig. 3-4). Using other batteries may result in
the risk of injury and fire.
• Protect the appliance against rain and
moisture� Water ingress increases the risk of
electric shock�
• Before charging, make sure that the appliance
(the battery of which you are going to charge)
supports charging from a USB connector
(DC 5V, 1A / 2A)�
• Use a USB cable specifically recommended
for your device (gadget); otherwise the device
(gadget) may be damaged�
• Do not insert any objects (nails, clips, wire,
etc�) into the USB connector, as this may cause
short circuit or fire.
• Do not direct a flashlight beam at people or
animals and do not look at a direct or reflected
Technical data
Cordless USB charger CAU01 CAU02X
Appliance code 424839 424846
Input voltage [V] 12-20 * 20 *
Output voltage (current intensity):
- USB1 (type A) 5V (1A) 5V (1A)
- USB2 (type A) 5V (2A) 5V (2A)
Battery type Li-Ion Li-Ion
Compatible batteries see fig. 3 see fig. 4
LED power [W] 0,6 0,6
Weight (without battery)
[kg]
[lb]
0,85
1�87
0,85
1�87
Safety class III III
* Maximum initial battery voltage (measured without workload) is 20 Volts� Nominal voltage
is 18 Volts�