CSL Series Power Amplifiers
Page 5
1.1 Unpacking
Please unpack and inspect your new amplifier for any
damage that may have occurred during transit. If dam-
age is found, notify the transportation company imme-
diately. Only you may initiate a claim with the carrier for
damage resulting during shipment. Even if the unit ar-
rived in perfect condition, as most do, save all packing
materials so you will have them if you ever need to trans-
port the unit. NEVER SHIP THE UNIT WITHOUT THE
FACTORY PACK.
1 Welcome
Congratulations on your purchase of a Crown
®
CSL
®
amplifier.
CSL amplifiers are compact, professional ste-
reo power amplifiers engineered to meet the most de-
manding sound reinforcement needs. They compare
very favorably to more expensive amplifiers, providing
uncolored sound and signal-to-noise ratios more com-
monly associated with recording studios.
This manual will help you successfully install and use
your amplifier—we strongly recommend you read all
instructions, warnings and cautions. If you plan to oper-
ate in one of the two mono modes, be sure to read the
Mono section. Also for your protection, please save
your bill of sale as it is your official proof of purchase.
1.2 Features
❏
Rugged, professional power amplifier mounts in a stan-
dard 19 inch (48.3 cm) equipment rack.
❏
Front panel power switch with turn-on delay for loud-
speaker protection.
❏
Full, uncolored power with any reasonable load.
❏
Patented Output Device Emulation Protection (
ODEP
®
)
keeps the amplifier working when others would fail.
❏
High damping factor provides superior control over low-
frequency drivers for a clean, accurate low end.
❏
Safe with any load. Bridge-Mono and Parallel-Mono
modes offer optimal load-matching performance.
❏
Complete protection against shorted outputs, mis-
matched loads, overheating, DC input/output and high-
frequency overload; full internal fault protection.
❏
Balanced phone jack inputs with internal three-posi-
tion sensitivity switch. Optional XLR or barrier block
input connectors are available with the
MT-XLR and
MT-BB accessories.
❏
Ground lift switch helps prevent “ground loops” by iso-
lating the chassis from the phone input grounds.
❏
Efficient heat sinks and self-contained forced air cool-
ing system dissipate heat quickly and evenly for extra
amplifier protection and greater power output.
❏
Three year “No-Fault” full warranty and guaranteed
specifications protect your investment.
OFF
POWER
Enable
Switch
Enable
Indicator
Removable Grille
and Dust Filter
Fig. 1.1 1400 CSL Front and Back Panels
