background image

CSL Series  Power Amplifiers

Page 4

CONTENTS

1 Welcome ....................................................................... 5

1.1 Unpacking ............................................................. 5
1.2 Features ................................................................ 5

2 Installation .................................................................... 6

2.1 Stereo .................................................................... 6
2.2 Mono ..................................................................... 6
2.3 Input Sensitivity Adjustment ................................... 8
2.4 Additional Load Protection ..................................... 8

3 Operation ..................................................................... 9

3.1 Precautions ............................................................ 9
3.2 Indicators .............................................................. 9
3.3 Protection Systems ................................................ 9

3.3.1

ODEP .......................................................... 9

3.3.2 Ultrasonic and RF Protection ....................... 9
3.3.3 Drive Protection ........................................... 9
3.3.4 Transformer Thermal Protection ................... 9
3.3.5 Fuses and Circuit Breakers ........................ 10

3.4 Controls ............................................................... 10
3.5 Filter Cleaning ...................................................... 10

4 Specifications ............................................................ 11

5 Accessories ............................................................... 17

5.1 MT-XLR ................................................................ 17
5.2 MT-BB .................................................................. 17

6 Service ....................................................................... 18

6.1 Worldwide Service ............................................... 18
6.2 North American Service ....................................... 18

6.2.1 Service at a N. American Service Center ... 18
6.2.2 Factory Service ......................................... 18

Summary of Contents for 1400 CSL




















Reviews: