27
6. Troubleshooting
Table 6
Symptom
Action
Gas-Pro does not go
into bump mode
Ensure the Gas-Pro is on and configured to bump test.
Ensure the gas is correct for the Gas-Pro type presented.
Ensure the gas is manually turned on for the duration of the test.
Check the gasket for any signs of damage or wear and tear.
Ensure the door is fully closed.
Gas-Pro does not
pass the bump test
If the Gas-Pro still fails it is very likely that the Gas-Pro requires calibration.
Gas-Pro does not
charge
(Powered Q-Test
only)
Check power supply is turned on and connected.
Check that charging contacts are not damaged and are clean
Contents
Exit
Prologue
Set-up
Operation
Service and
maintenance
Specification
Warranty
Unpacking
Contacts
Troubleshooting
