Crowcon Gas-Tec, User Manual, Page: 33 / 40

Gas-Tec Troubleshooting Troubleshooting
33
XIII Troubleshooting
13.1 Troubleshooting guide
Symptom Diagnosis Remedy/check
Does not switch on Battery flat Recharge battery
Flame goes out Machine has been tilted Set machine upright
Flame goes out Material has entered Gas-Tec Check filters
Data card 95% Memory card almost full Back up log files and delete from
card
GPS reading No lock Take outside and wait
No card shown on LCD No card detected Check if memory card is inserted
into the card slot
13.2 Warnings list
Popup Message What this means What you need to do Where to find
further info
Where to find further info
Please Wait Wait until next instructions Do not press any buttons and
wait for any new messages .
Press Igniter Instruction to press ignitor Press the igniter . III .x
Turn On Gas Supply Device needs Hydrogen gas to
continue .
Turn on the Gas by opening the
knob on the cylinder .
III .x
Gas Supply Low / No
Cylinder attached .
Gas pressure is low or cylinder
not attached
Check the bottle pressure and / or
replace the cylinder
III .x
System Primed Prepared for firing Wait for new messages III .x
Auto Zero, Place
probe in clean Air .
Device prepared to set the zero
PPM level .
Make sure that the device is in
clean air and / or the background
PPM level is less than 30 PPM
III .x
Reading Marked The current record (with GPS
DATA) is flagged in the logs .
Information only . VI .x
Reading Marked (No
GPS Fix)
The current record (without
GPS DATA) is flagged in the
logs .
Information only . Recommended
to achieve GPS lock first .
VI .x
Do you want to stop
readings
The Stop button is pressed .
User confirmation to stop .
Confirm by pressing the Yes / No
button .
III .x
Enter Pin For Access
to admin menu
User trying to access protected
settings .
Enter a valid pin to continue . VII .x
PIN Wrong Invalid PIN entered Enter a valid PIN VII .x
Time Not Saved Back button pressed on Set
time page .
Press OK to change time or back
button to cancel .
V .x
Date Not Saved Back button pressed on Set
date page .
Press OK to change date or back
button to cancel .
V .x
Saved OK button pressed The new values updated suc-
cessfully .
V .x, VII .x
Enter New Admin Pin Request to enter new admin
pin .
Enter a new PIN for admin menu . VII .x