Crowcon Gas-Tec, User Manual, Page: 16 / 40

Function overview Gas-Tec
16
IV Function overview
This section provides an overview of what can be viewed and changed on the Gas-Tec and where to find
further information on how to control the instrument .
Start menu (see Chapter III)
Property Default Other options
Sound volume 25 5 - 50
Range Graphical Analogue or Graphical and Analogue
FID range 1000 ppm 100 ppm
10000 ppm
Set-up menu (see Chapter V)
Property Default Other options
Contrast 25 5 - 50
Sound volume 25 5 - 50
Range Graphical Analogue or Graphical and Analogue
Date 01/01/09
Date format DD/MM/YY DD/MM/YYYY
MM/DD/YY
MM/DD/YYYY
Time 00:00:00
Backlight timeout 30s 1 min
3 min
Disable
Pressure units psi bar
Speed mph (miles per hour) km/h (kilometres per hour)
m/s (metres per second)
Kts (knots)
Admin menu (see Chapter VII)
IMPORTANT NOTE: Accepting the option RESET DEFAULTS on this menu may remove calibration and
other settings . DO NOT do this unless absolutely sure
Property Default Other options
PIN number 1234 User choice (which should be made
and used only by senior engineer)
Service Date 06 This figure is the number of months
from the time and date entered at
set-up This figure is the number
of months from the time and date
entered at set-up when the unit will
go into ‘service due’ . If the Service
Lock is on, the unit will stop working .
If the Service Lock is off, the spanner
will show on the LCD display . The
number can be changed from 6 to
any number between 1 and 12 .
Service Lock No Yes
Error Override No Yes