6
Table 1: List of Audible Signals
Sound
Sequence
Description
Short beep
Once only
A key in the keypad has been pressed
3 short beeps Once only
Operation carried out successfully
Long beep
Once only
Illegal operation, or wrong key pressed
Slow beeping Through the Exit or
Entry delay time
Exit or entry delay warning when arming
the system indicates that you must exit the
protected area,
also Entry delay warning when entering
via the entry zone, to disarm the system.
Indicators
The indicators show the status of the system. The LED indicators are listed in Table 2.
Table 2: List of LED Indicators
Design.
Function
Bypass
Indicates that there are bypassed zones
Stay
Indicates that the system is armed in STAY mode
Armed
Indicates that the system is fully armed, or a partition is armed
Ready
Indicates that the system is ready to be armed
Trouble
Indicates system failure, or problem. Make note of system message
and call service
Display
The LCD window holds 2 rows of 16 characters each.
The display shows:
System Messages
Open Zones
System Status
Trouble Messages
Memory Events
Description of zones
Zone numbers during programming
Device numbers during control
www.msealarms.com.au
All manuals and user guides at all-guides.com
all-guides.com
